Narodni 3 3 2008
Pro vyhledávací frázi Narodni 3 3 2008 jsme na našem vyhledávači našli 18461 výsledků. Nenašli jste přesně to, co jste hledali? Zkuste frázi Narodni 3 3 2008 trochu pozměnit a opět zadat do vyhledávacího pole. Pevně věříme, že produkt, který hledáte v naší nabídce na srovnávači CoChceš.cz naleznete!
ISO 18132-2:2008 4.3.2008
Platná norma ISO 18132-2:2008 Refrigerated light hydrocarbon fluids -- General requirements for automatic level gauges -- Part 2: Gauges in refrigerated-type shore tanks(Hydrocarbures légers réfrigérés -- Exigences générales pour jauges de niveau automatiques -- Partie 2: Jauges pour réservoirs côtiers de type réfrigéré)
Více informacíBS EN 50444:2008 31.3.2008
Platná norma BS EN 50444:2008 Basic standard for the evaluation of human exposure to electromagnetic fields from equipment for arc welding and allied processes.(Základní norma pro hodnocení vystavení člověka elektromagnetickým polím ze zařízení pro obloukové svařování a příbuzné procesy.)
Více informacíISO 4126-9:2008 31.3.2008
Platná norma ISO 4126-9:2008 Safety devices for protection against excessive pressure -- Part 9: Application and installation of safety devices excluding stand-alone bursting disc safety devices(Dispositifs de sécurité pour protection contre les pressions excessives -- Partie 9: Application et installation des dispositifs de sécurité autres que les dispositifs a dis...
Více informacíUNE 60402-1:2008 18.3.2008
Platná norma UNE 60402-1:2008 GASEOUS FUELS. PRESSURE REGULATOR WITH AN INLET MOP UP TO 0,4 BAR AND AN OUTLET MOP UP TO 0,05 BAR. PART 1: REGULATORS WITH AN INCORPORATED LOW PRESSURE CUT-OFF SAFETY VALVE WITH AN EQUIVALENT FLOW RATE UP TO 4,8 M3 (N)/H OF AIR.
Více informacíISO 15012-2:2008 20.3.2008
Platná norma ISO 15012-2:2008 Health and safety in welding and allied processes -- Requirements, testing and marking of equipment for air filtration -- Part 2: Determination of the minimum air volume flow rate of captor hoods and nozzles(Hygiene et sécurité en soudage et techniques connexes -- Exigences, essais et marquage des équipements de filtration d´air -- Part...
Více informacíISO 18213-4:2008 10.3.2008
Platná norma ISO 18213-4:2008 Nuclear fuel technology -- Tank calibration and volume determination for nuclear materials accountancy -- Part 4: Accurate determination of liquid height in accountancy tanks equipped with dip tubes, slow bubbling rate(Technologie du combustible nucléaire -- Étalonnage et détermination du volume de cuve pour la comptabilité des matieres...
Více informacíISO 18213-5:2008 10.3.2008
Platná norma ISO 18213-5:2008 Nuclear fuel technology -- Tank calibration and volume determination for nuclear materials accountancy -- Part 5: Accurate determination of liquid height in accountancy tanks equipped with dip tubes, fast bubbling rate(Technologie du combustible nucléaire -- Étalonnage et détermination du volume de cuve pour la comptabilité des matieres...
Více informacíISO 18213-6:2008 10.3.2008
Platná norma ISO 18213-6:2008 Nuclear fuel technology -- Tank calibration and volume determination for nuclear materials accountancy -- Part 6: Accurate in-tank determination of liquid density in accountancy tanks equipped with dip tubes(Technologie du combustible nucléaire -- Étalonnage et détermination du volume de cuve pour la comptabilité des matieres nucléaires...
Více informacíBS EN 50445:2008 31.3.2008
Neplatná norma BS EN 50445:2008 Product family standard to demonstrate compliance of equipment for resistance welding, arc welding and allied processes with the basic restrictions related to human exposure to electromagnetic fields (0 Hz - 300 GHz).(Základní výrobková norma k prokazování shody zařízení pro odporové svařování, obloukové svařování a příbuzné procesy s...
Více informacíUNE 60402-2:2008 18.3.2008
Platná norma UNE 60402-2:2008 GASEOUS FUELS. PRESSURE REGULATOR WITH AN INLET MOP UP TO 0,4 BAR AND AN OULET MOP UP TO 0,05 BAR. PART 2: REGULATOR WITH A MOP GREATER THAN 150 MBAR, WITH AN INCORPORATED MINIMUM LOW PRESSURE CUT-OFF SAFETY VALVE, WITH A MAXIMUM PRESSURE SAFETY VALVE AND AN EQUIVALENT FLOW RATE UP TO 4,8 M3 (N)/H OF AIR.
Více informacíISO 25981:2008/Cor 1:2008 3.12.2008
Platná norma ISO 25981:2008/Cor 1:2008 Road vehicles -- Connectors for the electrical connection of towing and towed vehicles -- Connectors for electronically monitored charging systems with 12 V or 24 V nominal supply voltage -- Technical Corrigendum 1(Véhicules routiers -- Raccords pour les connexions électriques des véhicules tracteurs et des véhicules tractés --...
Více informacíE DIN 58143-3:2008-03 1.3.2008
Neplatná norma E DIN 58143-3:2008-03 Data sheet specification of fibre optic products - Part 3: Flexible image guides.
Více informacíDIN 14507-3:2008-03 1.3.2008
Neplatná norma DIN 14507-3:2008-03 Command and control appliances - Part 3: Command and control car ELW 2.
Více informacíE DIN 12899-3:2008-03 1.3.2008
Neplatná norma E DIN 12899-3:2008-03 Emergency safety showers - Part 3: Body showers for production and logistic sites.
Více informacíDIN 51724-3:2008-03 1.3.2008
Neplatná norma DIN 51724-3:2008-03 Solid mineral fuels - Determination of sulfur - Part 3: Instrumental methods.
Více informacíBS EN 61784-3-3:2008 29.8.2008
Neplatná norma BS EN 61784-3-3:2008 Industrial communication networks. Profiles. Functional safety fieldbuses. Additional specifications for CPF 3.(Průmyslové komunikační sítě - Profily - Část 3-3: Funkční bezpečnost sběrnic pole - Dodatečné specifikace pro CPF 3 )
Více informacíDIN EN 62282-3-3:2008-10 1.10.2008
Neplatná norma DIN EN 62282-3-3:2008-10 VDE 0130-303. Fuel cell technologies - Part 3-3: Stationary fuel cell power systems - Installation.(Technologie palivových článků - Část 3-3: Stabilní napájecí systémy na palivové články - Instalace. .)
Více informacíE DIN EN 12808-3:2008-03 1.3.2008
Neplatná norma E DIN EN 12808-3:2008-03 Grouts for tiles - Determination of flexural and compressive strength.
Více informacíE DIN ISO 5855-3:2008-03 1.3.2008
Neplatná norma E DIN ISO 5855-3:2008-03 Aerospace - MJ threads - Part 3: Limit dimensions for fittings for fluid systems.
Více informacíE DIN IEC 62333-3:2008-03 1.3.2008
Neplatná norma E DIN IEC 62333-3:2008-03 Noise suppression sheet for digital devices and equipment - Part 3: Characteristics of parameters of Noise Suppression Sheet.
Více informacíBS ISO/IEC 15457-3:2008 31.3.2008
Platná norma BS ISO/IEC 15457-3:2008 Identification cards. Thin flexible cards. Test methods.(Identifikační karty - Tenké ohebné karty - Část 3: Zkušební metody.)
Více informacíDIN 18861-3:2008-03 1.3.2008
Neplatná norma DIN 18861-3:2008-03 Equipment for commercial kitchens - Dishwashing facilities and sinks - Part 3: Hand rinse basin, requirements and testing.
Více informacíDIN 6875-3:2008-03 1.3.2008
Platná norma DIN 6875-3:2008-03 Special radiotherapy equipments - Part 3: Intensity-modulated radiation therapy - Characteristics, test methods and rules for clinical application.
Více informacíDIN 70020-3:2008-03 1.3.2008
Platná norma DIN 70020-3:2008-03 Road vehicles - Automotive engineering - Part 3: Testing conditions, maximum speed, acceleration and elasticity, mass, terms, miscellaneous.
Více informacíBS EN 62282-3-3:2008 30.9.2008
Neplatná norma BS EN 62282-3-3:2008 Fuel cell technologies. Stationary fuel cell power systems. Installation.(Technologie palivových článků - Část 3-3: Stabilní napájecí systémy na palivové články - Instalace. )
Více informacíISO 8116-3:2008-ed.3.0 1.12.2008
Platná norma ISO 8116-3:2008-ed.3.0 Textile machinery and accessories -- Beams for winding -- Part 3: Weaver´s beams(Matériel pour l´industrie textile -- Ensouples pour enroulement -- Partie 3: Ensouples de tissage)
Více informacíDIN EN 61158-3-3:2008-09 1.9.2008
Neplatná norma DIN EN 61158-3-3:2008-09 Industrial communication networks - Fieldbus specifications - Part 3-3: Data-link layer service definition - Type 3 elements.(Průmyslové komunikační sítě - Specifikace sběrnice pole - Část 3-3: Definice služby datového spoje - Prvky typu 3 .)
Více informacíDIN EN 61784-3-3:2008-11 1.11.2008
Neplatná norma DIN EN 61784-3-3:2008-11 Industrial communication networks - Profiles - Part 3-3: Functional safety fieldbuses - Additional specifications for CPF 3.(Průmyslové komunikační sítě - Profily - Část 3-3: Funkční bezpečnost sběrnic pole - Dodatečné specifikace pro CPF 3 .)
Více informacíDIN EN 15316-3-3:2008-06 1.6.2008
Neplatná norma DIN EN 15316-3-3:2008-06 Heating systems in buildings - Method for calculation of system energy requirements and system efficiencies - Part 3-3: Domestic hot water systems, generation.(Tepelné soustavy v budovách - Výpočtová metoda pro stanovení energetických potřeb a účinností soustavy - Část 3-3: Soustavy teplé vody, příprava.)
Více informacíBS ISO 22241-3:2008 31.3.2008
Neplatná norma BS ISO 22241-3:2008 Diesel engines. NOx reduction agent AUS 32. Handling, transportation and storage.(Vznětové motory - Činidlo pro snížení NOx, vodný roztok močoviny (AUS 32) - Část 3: Manipulace, doprava a skladování. )
Více informacíE DIN IEC 61108-3:2008-03 1.3.2008
Neplatná norma E DIN IEC 61108-3:2008-03 Maritime navigation and radiocommunication equipment and systems - Global navigation satellite systems (GNSS) - Part 3: Galileo - Receiver equipment - Performance requirements, methods of testing and required test results ; Text in English.
Více informacíBS EN 60584-3:2008 31.3.2008
Platná norma BS EN 60584-3:2008 Thermocouples. Extension and compensating cables. Tolerances and identification system.(Termoelektrické články - Část 3: Prodlužovací a kompenzační vedení - Systém tolerancí a značení.)
Více informacíUNE-EN ISO 1167-3:2008 5.3.2008
Platná norma UNE-EN ISO 1167-3:2008 THERMOPLASTICS PIPES, FITTINGS AND ASSEMBLIES FOR THE CONVEYANCE OF FLUIDS - DETERMINATION OF THE RESISTANCE TO INTERNAL PRESSURE - PART 3: PREPARATION OF COMPONENTS (ISO 1167-3:2007)(Trubky, tvarovky a sestavy z termoplastů pro rozvod tekutin - Stanovení odolnosti vnitřnímu přetlaku - Část 3: Příprava zkušebních těles ze součástí...
Více informacíUNE-EN ISO 13732-3:2008 3.12.2008
Platná norma UNE-EN ISO 13732-3:2008 ERGONOMICS OF THE THERMAL ENVIRONMENT - METHODS FOR THE ASSESSMENT OF HUMAN RESPONSES TO CONTACT WITH SURFACES - PART 3: COLD SURFACES (ISO 13732-3:2005)(Ergonomie tepelného prostředí - Metody posuzování odezvy člověka na kontakt s povrchy - Část 3: Chladné povrchy.)
Více informacíDIN EN 60068-3-11:2008-03 1.3.2008
Platná norma DIN EN 60068-3-11:2008-03 VDE 0468-3-11. Environmental testing - Part 3-11: Supporting documentation and guidance - Calculation of uncertainty of conditions in climatic test chambers.(Zkoušení vlivů prostředí - Část 3-11: Doprovodná dokumentace a návod - Výpočet nejistoty podmínek v klimatických zkušebních komorách.)
Více informacíDIN EN 61340-3-1:2008-03 1.3.2008
Platná norma DIN EN 61340-3-1:2008-03 VDE 0300-3-1. Electrostatics - Part 3-1: Methods for simulation of electrostatic effects - Human body model (HBM) electrostatic discharge test waveforms.(Elektrostatika - Část 3-1: Metody simulace elektrostatických jevů - Model lidského těla (HBM) - Zkoušení součástek..)
Více informacíNárodní park Yellowstone: Krajem gejzírů a horkých pramenů (978-80-7497-271-3)
Kniha - autor Jaromír J. Krejčí, 160 stran, česky, pevná s přebalem lesklá Publikace Národní park Yellowstone vás stručně provede slovem i obrazem po všech trasách, které je možné absolvovat autem, upozorní vás na místa, jež byste přešli bez povšimnutí.
Více informacíISO 5771:2008-ed.3.0 3.9.2008
Platná norma ISO 5771:2008-ed.3.0 Rubber hoses and hose assemblies for transferring anhydrous ammonia -- Specification(Tuyaux et flexibles en caoutchouc pour le transfert d´ammoniac anhydre -- Spécifications)
Více informacíISO 6393:2008-ed.3.0 10.3.2008
Platná norma ISO 6393:2008-ed.3.0 Earth-moving machinery -- Determination of sound power level -- Stationary test conditions(Engins de terrassement -- Détermination du niveau de puissance acoustique -- Conditions d´essai statique)
Více informacíISO 3828:2008-ed.3.0 4.3.2008
Platná norma ISO 3828:2008-ed.3.0 Shipbuilding and marine structures -- Deck machinery -- Vocabulary and symbols(Construction navale et structures maritimes -- Auxiliaires de pont -- Vocabulaire et symboles)
Více informacíISO 517:2008-ed.3.0 10.3.2008
Platná norma ISO 517:2008-ed.3.0 Photography -- Apertures and related properties pertaining to photographic lenses -- Designations and measurements(Photographie -- Ouvertures et grandeurs associées relatives aux objectifs photographiques -- Désignations et mesurages)
Více informacíDIN EN ISO 22442-3:2008-03 1.3.2008
Platná norma DIN EN ISO 22442-3:2008-03 Medical devices utilizing animal tissues and their derivatives - Part 3: Validation of the elimination and/or inactivation of viruses and transmissible spongiform encephalopathy (TSE) agents.(Zdravotnické prostředky používající živočišné tkáně a jejich deriváty - Část 3: Validace eliminace a/nebo inaktivace virů a agens přenos...
Více informacíDIN EN 15267-3:2008-03 1.3.2008
Platná norma DIN EN 15267-3:2008-03 Air quality - Certification of automated measuring systems - Part 3: Performance criteria and test procedures for automated measuring systems for monitoring emissions from stationary sources.(Kvalita ovzduší - Certifikace automatizovaných měřicích systémů - Část 3: Měřítka výkonu a postupy zkoušení pro automatizované měřicí systém...
Více informacíUNE-EN 1062-3:2008 18.3.2008
Platná norma UNE-EN 1062-3:2008 PAINTS AND VARNISHES - COATING MATERIALS AND COATING SYSTEMS FOR EXTERIOR MASONRY AND CONCRETE - PART 3: DETERMINATION OF LIQUID WATER PERMEABILITY(Nátěrové hmoty - Povlakové materiály a povlakové systémy pro vnější zdivo a betony - Část 3: Stanovení permeability vody v kapalné fázi.)
Více informacíUNE-EN 13032-3:2008 3.12.2008
Platná norma UNE-EN 13032-3:2008 LIGHT AND LIGHTING - MEASUREMENT AND PRESENTATION OF PHOTOMETRIC DATA OF LAMPS AND LUMINAIRES - PART 3: PRESENTATION OF DATA FOR EMERGENCY LIGHTING OF WORK PLACES(Světlo a osvětlení - Měření a uvádění fotometrických údajů světelných zdrojů a svítidel - Část 3: Způsob uvádění údajů pro nouzové osvětlení pracovních prostorů.)...
Více informacíUNE-EN 14879-3:2008 12.3.2008
Platná norma UNE-EN 14879-3:2008 ORGANIC COATING SYSTEMS AND LININGS FOR PROTECTION OF INDUSTRIAL APPARATUS AND PLANTS AGAINST CORROSION CAUSED BY AGGRESSIVE MEDIA - PART 3: COATINGS ON CONCRETE COMPONENTS(Systémy organických povlaků a obkladů pro ochranu průmyslových zařízení a provozů proti korozi způsobené agresivním prostředím - Část 3: Povlaky na betonových čás...
Více informacíDIN EN ISO 3826-3:2008-03 1.3.2008
Platná norma DIN EN ISO 3826-3:2008-03 Plastics collapsible containers for human blood and blood components - Part 3: Blood bag systems with integrated features.(Plastové vaky na lidskou krev a krevní komponenty - Část 3: Systémy krevních vaků s integrovanými prvky.)
Více informacíDIN VDE 0636-3:2008-03 1.3.2008
Neplatná norma DIN VDE 0636-3:2008-03 VDE 0636-3. Low-voltage fuses - Part 3: Supplementary requirements for fuses for use by unskilled persons (fuses mainly for household or similar applications) - Examples of standardized systems of fuses A to F.
Více informacíUNE-EN 60601-1-3:2008 3.12.2008
Platná norma UNE-EN 60601-1-3:2008 MEDICAL ELECTRICAL EQUIPMENT- PART 1-3: GENERAL REQUIREMENTS FOR BASIC SAFETY AND ESSENTIAL PERFORMANCE- COLLATERAL STANDARD: RADIATION PROTECTION IN DIAGNOSTIC X-RAY EQUIPMENT(Zdravotnické elektrické přístroje - Část 1: Všeobecné požadavky na bezpečnost - 3. skupinová norma: Všeobecné požadavky na ochranu před zářením u diagnostic...
Více informacíBS EN 61000-3-3:2008 31.12.2008
Neplatná norma BS EN 61000-3-3:2008 Electromagnetic compatibility (EMC). Limits. Limitation of voltage changes, voltage fluctuations and flicker in public low-voltage supply systems, for equipment with rated current $3L 16 A per phase and not subject to conditional connection.(Elektromagnetická kompatibilita (EMC) - Část 3-3: Meze - Omezování změn napětí, kolísání n...
Více informacíDIN EN 60454-3-11:2008-03 1.3.2008
Platná norma DIN EN 60454-3-11:2008-03 VDE 0340-3-11. Pressure-sensitive adhesive tapes for electrical purposes - Part 3: Specifications for individual materials - Sheet 11: Polyester film combinations with glass filament, creped cellulosic paper, polyester non-woven, epoxy and pressure-sensitive adhesives.(Samolepicí pásky pro elektrotechnické účely - Část 3: Speci...
Více informacíBS EN 1568-3:2008 31.3.2008
Neplatná norma BS EN 1568-3:2008 Fire extinguishing media. Foam concentrates. Specification for low expansion foam concentrates for surface application to water-immiscible liquids.(Hasiva - Pěnidla - Část 3: Technické podmínky pro pěnidla na těžkou pěnu k aplikaci na povrch kapalin nemísitelných s vodou. )
Více informacíBS EN 61189-3:2008 31.3.2008
Platná norma BS EN 61189-3:2008 Test methods for electrical materials, printed boards and other interconnection structures and assemblies. Test methods for interconnection structures (printed boards).(Zkušební metody pro elektrotechnické materiály, propojovací struktury a sestavy - Část 3: Zkušební metody pro propojovací struktury (desky s plošnými spoji). )...
Více informacíDIN EN 15416-3:2008-03 1.3.2008
Neplatná norma DIN EN 15416-3:2008-03 Adhesives for load bearing timber structures other than phenolic and aminoplastic - Test methods - Part 3: Creep deformation test at cyclic climate conditions with specimens loaded in bending shear.(Lepidla pro nosné dřevěné konstrukce jiná než fenolická a aminová - Zkušební metody - Část 3: Zkouška krípové deformace při cyklick...
Více informacíISO 16366:2008-ed.2.0 3.3.2008
Platná norma ISO 16366:2008-ed.2.0 Tools for pressing -- L-shaped guides(Outillage de presse -- Glissieres de guidage en L)
Více informacíRD 52.24.361-2008 3.3.2008
Platná norma RD 52.24.361-2008 Mass concentration of chlorides in water. Measurement procedure by potentiometric method with ion-selective electrode
Více informacíRD 52.24.365-2008 3.3.2008
Platná norma RD 52.24.365-2008 Mass concentration of sodium in water. Measurement procedure by potentiometric method with ion-selective electrode
Více informacíISO 6394:2008-ed.3.0 10.3.2008
Platná norma ISO 6394:2008-ed.3.0 Earth-moving machinery -- Determination of emission sound pressure level at operator´s position -- Stationary test conditions(Engins de terrassement -- Détermination du niveau de pression acoustique d´émission au poste de conduite -- Conditions d´essai statique)
Více informacíISO 16367:2008-ed.2.0 3.3.2008
Platná norma ISO 16367:2008-ed.2.0 Tools for pressing -- Guide plates -- U- and V-blocks(Outillage de presse -- Plaques de guidage -- Blocs en U et en V)
Více informací100 pokladů naší planety Národní parky (978-80-255-1134-3)
Kniha - 256 stran, česky, pevná bez přebalu lesklá Kniha představuje stovku těch nejpozoruhodnějších přírodních oblastí světa. Patří mezi ně mimo jiné Yellowstonský národní park v USA, peruánské obydlené jezero Titicaca, ráj varanů – park Komodo v Indonésii, japonský vulkán Aso, islandské ledovce chráněné národním parkem Skaftafell, tanzanský kráter Ngorongoro, Viktor...
Více informacíPodobné fráze: e din en 1993 1 3 na 2008 02 1 2 2008 | e din iec 60601 2 43 2008 03 1 3 2008 | din iso 1837 2008 03 1 3 2008 | din en 3155 040 2008 10 1 10 2008 | din en 3662 001 2008 02 1 2 2008 | din iso ts 22475 3 2008 07 1 7 2008 | din en 14814 2008 03 1 3 2008 | din en 4057 306 2008 02 1 2 2008 | e din iec 60958 3 a1 2008 10 1 10 2008 | e din iec 80001 2008 03 1 3 2008 | e din iec 61300 3 4 2008 02 1 2 2008 | e din en 13414 3 a1 2008 05 1 5 2008 | e din en 982 a1 2008 03 1 3 2008 | e din en iso 3506 4 2008 04 1 4 2008 | din en 3155 044 2008 10 1 10 2008 | e din en 792 10 a1 2008 03 1 3 2008 | bs en iso 15088 2008 31 12 2008 | e din en 3155 070 2008 10 1 10 2008 | e din vde 0298 300 a2 2008 02 1 2 2008 | e din vde 0276 605 2008 03 1 3 2008 | e din en 13480 3 a5 2008 01 1 1 2008 | bs en iso 15403 1 2008 31 12 2008 | bs en iso 10239 2008 31 7 2008 | e din iec 60034 31 2008 08 1 8 2008 | e din en 3733 106 2008 12 1 12 2008 | bs en iso 11145 2008 30 9 2008 | e din en 415 3 a1 2008 04 1 4 2008 | bs en iso 14744 1 2008 30 6 2008 | e din en 1991 3 na 2008 04 1 4 2008 | bs en iso 20541 2008 30 9 2008 | e din en 60601 2 44 2008 03 1 3 2008 | e din iso 5855 1 2008 03 1 3 2008 | din en iso 3823 2 2008 11 1 11 2008 | e din en 1012 3 2008 04 1 4 2008 | e din en 255 3 2008 09 1 9 2008