Onorm en 14468 1 1 3 2005
Pro vyhledávací frázi Onorm en 14468 1 1 3 2005 jsme na našem vyhledávači našli 817 výsledků. Nenašli jste přesně to, co jste hledali? Zkuste frázi Onorm en 14468 1 1 3 2005 trochu pozměnit a opět zadat do vyhledávacího pole. Pevně věříme, že produkt, který hledáte v naší nabídce na srovnávači CoChceš.cz naleznete!
ÖVE/ÖNORM EN 60312+A1+A2 1.3.2005
Neplatná norma ÖVE/ÖNORM EN 60312+A1+A2 Staubsauger für den Hausgebrauch - Prüfverfahren zur Bestimmung der Gebrauchseigenschaften (IEC 60312:1998 + A1:2000 + A2:2004)
Více informacíE ÖVE/ÖNORM EN 55014-2/ISA 1.3.2005
Neplatná norma E ÖVE/ÖNORM EN 55014-2/ISA Interpretation of Subclause 8.4 of EN 55014-2:1997 + A1:2001 - Electromagnetic compatibility - Requirements for household appliances, electric tools and similar apparatus - Part 2: Immunity - Product family standard
Více informacíE ÖVE/ÖNORM EN 50065-2-3/A1 1.2.2005
Neplatná norma E ÖVE/ÖNORM EN 50065-2-3/A1 Signalling on low-voltage electrical installations in the frequency range 3 kHz to 148,5 kHz - Part 2-3: Immunity requirements for mains communications equipment and systems operating in the range of frequencies 3 kHz to 95 kHz and intended for use by electricity suppliers and distributors (Amendment)
Více informacíÖVE/ÖNORM EN 60811-3-2+A2 1.2.2005
Neplatná norma ÖVE/ÖNORM EN 60811-3-2+A2 Isolier- und Mantelwerkstoffe für Kabel und isolierte Leitungen - Allgemeine Prüfverfahren - Teil 3-2: Verfahren für PVC-Mischungen - Prüfung des Masseverlustes - Prüfung der thermischen Stabilität (IEC 60811-3-2:1985 + Corr. 1986 + A1:1993 + A2:2003)
Více informacíE ÖVE/ÖNORM EN 60917-2-3 1.5.2005
Neplatná norma E ÖVE/ÖNORM EN 60917-2-3 Modular order for the development of mechanical structures for electronic equipment practices - Part 2-3: Sectional standard - Interface coordination dimensions for the 25 mm equipment practice - Extended detail standard - Dimensions for subracks and chassis, backplanes, front panels and plug-in units (IEC 48D/322/CDV)
Více informacíE ÖVE/ÖNORM EN 61212-3-2 1.4.2005
Neplatná norma E ÖVE/ÖNORM EN 61212-3-2 Insulating materials - Industrial rigid round laminated tubes and rods based on thermosetting resins for electrical purposes - Part 3: Specifications for individual materials - Sheet 2: Round laminated moulded tubes (IEC 15C/1692/CDV)
Více informacíE ÖVE/ÖNORM EN 61326-2-3 1.4.2005
Neplatná norma E ÖVE/ÖNORM EN 61326-2-3 Electrical equipment for measurement, control and laboratory use - EMC requirements - Part 2-3: Particular requirements - Test configuration, operational conditions and performance criteria for transducers with integrated or remote signal conditioning (IEC 65A/433/CDV)
Více informacíE ÖVE/ÖNORM EN 55016-2-3/A2 1.5.2005
Neplatná norma E ÖVE/ÖNORM EN 55016-2-3/A2 Specification for radio disturbance and immunity measuring apparatus and methods - Part 2-3: Methods of measurement of disturbances and immunity - Radiated disturbance measurements (IEC CISPR/A/575/CDV) (Amendment)
Více informacíE ÖVE/ÖNORM EN 55016-2-3/A3 1.7.2005
Neplatná norma E ÖVE/ÖNORM EN 55016-2-3/A3 Specification for radio disturbance and immunity measuring apparatus and methods - Part 2-3: Methods of measurement of disturbances and immunity - Radiated disturbance measurements (IEC CISPR/A/590/CDV) (Amendment)
Více informacíE ÖVE/ÖNORM EN 60297-3-104 1.5.2005
Neplatná norma E ÖVE/ÖNORM EN 60297-3-104 Mechanical structures for electronic equipment - Dimensions of mechanical structures of the 482,6 mm (19 in) series - Part 3-104: Connector dependent interface dimensions of subracks and plug-in units (IEC 48D/321/CDV)
Více informacíE ÖVE/ÖNORM EN 60371-3-4/A1 1.2.2005
Neplatná norma E ÖVE/ÖNORM EN 60371-3-4/A1 Specification for insulating materials based on mica - Part 3: Specifications for individual materials - Sheet 4: Polyester film-backed mica paper with a B-stage epoxy resin binder (IEC 15C/1671/CDV) (Amendment)
Více informacíE ÖVE/ÖNORM EN 60371-3-6/A1 1.2.2005
Neplatná norma E ÖVE/ÖNORM EN 60371-3-6/A1 Specification for insulating materials based on mica - Part 3: Specifications for individual materials - Sheet 6: Glass-backed mica paper with a B-stage epoxy resin binder (IEC 15C/1672/CDV) (Amendment)
Více informacíE ÖVE/ÖNORM EN 60371-3-7/A1 1.2.2005
Neplatná norma E ÖVE/ÖNORM EN 60371-3-7/A1 Specification for insulating materials based on mica - Part 3: Specifications for individual materials - Sheet 7: Polyester film mica paper with an epoxy resin binder for single conductor taping (IEC 15C/1673/CDV) (Amendment)
Více informacíE ÖVE/ÖNORM EN 60454-3-11 1.12.2005
Neplatná norma E ÖVE/ÖNORM EN 60454-3-11 Pressure-sensitive adhesive tapes for electrical purposes - Part 3: Specifications for individual materials - Sheet 11: Polyester film combinations with glass filament; - creped cellulosic paper non-woven; epoxy and pressure-sensitive adhesives (IEC 15/239/CDV)
Více informacíE ÖVE/ÖNORM EN 60454-3-12 1.2.2005
Neplatná norma E ÖVE/ÖNORM EN 60454-3-12 Pressure-sensitive adhesive tapes for electrical purposes - Part 3: Specifications for individual materials - Sheet 12: Requirements for polyethylene and polypropylene film tapes with pressure sensitive adhesives (IEC 15C/1675/CDV)
Více informacíE ÖVE/ÖNORM EN 60454-3-4 1.12.2005
Neplatná norma E ÖVE/ÖNORM EN 60454-3-4 Pressure-sensitive adhesive tapes for electrical purposes - Part 3: Specifications for individual materials - Sheet 4: Requirements for cellulose paper, creped and non-creped, with rubber thermosetting adhesive (IEC 15/238/CDV)
Více informacíE ÖVE/ÖNORM EN 62271-100/A2 1.3.2005
Neplatná norma E ÖVE/ÖNORM EN 62271-100/A2 High-voltage switchgear and controlgear - Part 100: High-voltage alternating-current circuit-breakers (IEC 17A/719/CDV) (Amendment)
Více informacíE ÖVE/ÖNORM EN 60335-2-25/A2 1.3.2005
Neplatná norma E ÖVE/ÖNORM EN 60335-2-25/A2 Household and similar electrical appliances - Safety - Part 2-25: Particular requirements for microwave ovens, including combination microwave ovens (IEC 61B/295/CDV) (Amendment)
Více informacíE ÖVE/ÖNORM EN 60335-2-76/A1 1.3.2005
Neplatná norma E ÖVE/ÖNORM EN 60335-2-76/A1 Household and similar electrical appliances - Safety - Part 2-76: Particular requirements for electric fence energizers (IEC 61H/214/CDV) (Amendment)
Více informacíE ÖVE/ÖNORM EN 60335-2-76/AA 1.3.2005
Neplatná norma E ÖVE/ÖNORM EN 60335-2-76/AA Household and similar electrical appliances - Safety - Part 2-76: Particular requirements for electric fence energizers (IEC 61H/215/CDV) (Amendment)
Více informacíE ÖVE/ÖNORM EN 60454-3-8 1.2.2005
Neplatná norma E ÖVE/ÖNORM EN 60454-3-8 Pressure-sensitive adhesive tapes for electrical purposes - Part 3: Specifications for individual materials - Sheet 8: Glass fabric tapes with pressure sensitive adhesive - Cellulose acetate woven fabric tapes with rubber thermosetting adhesive - Combined cellulose-viscose woven fabric tapes, one side covered with a thermoplastic ma...
Více informacíE ÖNORM B1993-1-10 1.11.2005
Neplatná norma E ÖNORM B1993-1-10 Eurocode 3: Bemessung und Konstruktion von Stahlbauten - Teil 1-10: Stahlsortenauswahl im Hinblick auf Bruchzähigkeit und Eigenschaften in Dickenrichtung - Nationale Festlegungen zu ÖNORM EN 1993-1-10, nationale Erläuterungen und nationale Ergänzungen
Více informacíE ÖNORM B1993-1-8 1.11.2005
Neplatná norma E ÖNORM B1993-1-8 Eurocode 3: Bemessung und Konstruktion von Stahlbauten - Teil 1-8: Bemessung von Anschlüssen - Nationale Festlegungen zu ÖNORM EN 1993-1-8, nationale Erläuterungen und nationale Ergänzungen
Více informacíE ÖNORM B1993-1-9 1.11.2005
Neplatná norma E ÖNORM B1993-1-9 Eurocode 3: Bemessung und Konstruktion von Stahlbauten - Teil 1-9: Ermüdung - Nationale Festlegungen zu ÖNORM EN 1993-1-9, nationale Erläuterungen und nationale Ergänzungen
Více informacíÖVE/ÖNORM EN 61314-1 1.3.2006
Neplatná norma ÖVE/ÖNORM EN 61314-1 Lichtwellenleiteraufteiler - Teil 1: Fachgrundspezifikation (IEC 61314-1:2005)
Více informacíÖVE/ÖNORM EN 61988-3-1 1.6.2006
Platná norma ÖVE/ÖNORM EN 61988-3-1 Plasmabildschirme - Teil 3-1: Mechanische Schnittstelle (IEC 61988-3-1:2005)
Více informacíÖNORM EN ISO 4545-1 1.3.2006
Neplatná norma ÖNORM EN ISO 4545-1 Metallische Werkstoffe - Härteprüfung nach Knoop - Teil 1: Prüfverfahren (ISO 4545-1:2005)
Více informacíE ÖNORM EN ISO 17657-3 1.1.2007
Neplatná norma E ÖNORM EN ISO 17657-3 Widerstandsschweißen - Schweißstrommessung für das Widerstandsschweißen - Teil 3: Strommessspule (ISO 17657-3:2005)
Více informacíÖNORM EN 300392-12-16-V1.2.1 1.2.2005
Platná norma ÖNORM EN 300392-12-16-V1.2.1 Terrestrial Trunked Radio (TETRA) - Voice plus Data (V+D) - Part 12: Supplementary services stage 3 - Sub-part 16: Pre-emptive Priority Call (PPC)
Více informacíE ÖNORM EN 302018-2-V1.2.1 1.8.2005
Neplatná norma E ÖNORM EN 302018-2-V1.2.1 Electromagnetic compatibility and Radio spectrum Matters (ERM) - Transmitting equipment for the Frequency Modulated (FM) sound broadcasting service - Part 2: Harmonized EN under article 3.2 of the R&TTE Directive (EN 302018-2 V 1.2.1, not included)
Více informacíE ÖVE/ÖNORM EN 50065-2-1/A1 1.2.2005
Neplatná norma E ÖVE/ÖNORM EN 50065-2-1/A1 Signalling on low-voltage electrical installations in the frequency range 3 kHz to 148,5 kHz - Part 2-1: Immunity requirements for mains communications equipment and systems operating in the range of frequencies 95 kHz to 148,5 kHz and intended for use in residential, commercial and light industrial environments (Amendment)
Více informacíÖNORM EN ISO 11111-3 1.1.2017
Platná norma ÖNORM EN ISO 11111-3 Textilmaschinen - Sicherheitsanforderungen - Teil 3: Vliesstoffmaschinen (ISO 11111-3:2005 + Amd 1: 2009 + Amd 2:2016) (konsolidierte Fassung)
Více informacíÖNORM EN ISO 9100-3 1.1.2010
Platná norma ÖNORM EN ISO 9100-3 Glasbehälter - Vakuum-Nockenverschluss-Mündung - Teil 3: 38 regular (ISO 9100-3:2005 + Cor 1:2009) (konsolidierte Fassung)
Více informacíE ÖNORM EN ISO 8230-1 1.3.2006
Neplatná norma E ÖNORM EN ISO 8230-1 Safety requirements for dry-cleaning machines - Part 1: Common safety requirements (ISO/DIS 8230-1:2005)
Více informacíÖNORM EN ISO 10426-1 1.3.2007
Neplatná norma ÖNORM EN ISO 10426-1 Petroleum and natural gas industries - Cements and materials for well cementing - Part 1: Specification (ISO 10426-1:2005)
Více informacíÖVE/ÖNORM EN 61338-4-1 1.3.2006
Platná norma ÖVE/ÖNORM EN 61338-4-1 Dielektrische Resonatoren vom Wellenleitertyp - Teil 4-1: Vordruck für die Bauartspezifikation (IEC 61338-4-1:2005)
Více informacíÖVE/ÖNORM EN 60740-1 1.3.2006
Neplatná norma ÖVE/ÖNORM EN 60740-1 Kernbleche für Transformatoren und Drosseln - Teil 1: Mechanische und elektrische Eigenschaften (IEC 60740-1:2005)
Více informacíÖVE/ÖNORM EN 60950-1 1.3.2011
Neplatná norma ÖVE/ÖNORM EN 60950-1 Einrichtungen der Informationstechnik - Sicherheit - Teil 1: Allgemeine Anforderungen (IEC 60950-1:2005 + Cor.:2006 + A1:2009, modifiziert) (deutsche Fassung)
Více informacíÖVE/ÖNORM EN 61300-3-1 1.7.2006
Platná norma ÖVE/ÖNORM EN 61300-3-1 Lichtwellenleiter - Verbindungselemente und passive Bauteile - Grundlegende Prüf- und Messverfahren - Teil 3-1: Untersuchungen und Messungen - Sichtprüfung (IEC 61300-3-1:2005)
Více informacíÖVE/ÖNORM EN 61290-1-3 1.8.2006
Neplatná norma ÖVE/ÖNORM EN 61290-1-3 Prüfverfahren für Lichtwellenleiter-Verstärker - Teil 1-3: Optische Leistungs- und Verstärkerparameter - Verfahren mit optischem Leistungsmessgerät (IEC 61290-1-3:2005)
Více informacíE ÖNORM EN ISO 22477-1 1.3.2006
Neplatná norma E ÖNORM EN ISO 22477-1 Geotechnical investigation and testing - Testing of geotechnical structures - Part 1: Pile load test by static axially loaded compression (ISO/DIS 22477-1:2005)
Více informacíÖNORM EN ISO 3834-1 1.3.2006
Platná norma ÖNORM EN ISO 3834-1 Qualitätsanforderungen für das Schmelzschweißen von metallischen Werkstoffen - Teil 1: Kriterien für die Auswahl der geeigneten Stufe der Qualitätsanforderungen (ISO 3834-1:2005)
Více informacíÖVE/ÖNORM EN 60309-1 1.3.2013
Platná norma ÖVE/ÖNORM EN 60309-1 Stecker, Steckdosen und Kupplungen für industrielle Anwendungen - Teil 1: Allgemeine Anforderungen (IEC 60309-1:1999 + A1:2005, modifiziert + A2:2012) (deutsche Fassung)
Více informacíÖNORM EN ISO 14644-3 1.3.2006
Platná norma ÖNORM EN ISO 14644-3 Reinräume und zugehörige Reinraumbereiche - Teil 3: Prüfverfahren (ISO 14644-3:2005)
Více informacíÖNORM EN ISO 9100-3 1.3.2006
Neplatná norma ÖNORM EN ISO 9100-3 Glasbehälter - Vakuum-Nockenverschluss-Mündung - Teil 3: 38 regular (ISO 9100-3:2005)
Více informacíÖNORM EN ISO 16484-3 1.3.2006
Platná norma ÖNORM EN ISO 16484-3 Systeme der Gebäudeautomation (GA) - Teil 3: Funktionen (ISO 16484-3:2005)
Více informacíE ÖNORM EN ISO 11140-3 1.1.2006
Neplatná norma E ÖNORM EN ISO 11140-3 Sterilisation von Produkten für die Gesundheitsfürsorge - Chemische Indikatoren - Teil 3: Indikatorsysteme der Klasse 2 zur Verwendung im Bowie-Dick-Dampfdurchdringungstest (ISO/DIS 11140-3:2005)
Více informacíÖVE/ÖNORM EN 60061-3 1.1.2007
Neplatná norma ÖVE/ÖNORM EN 60061-3 Lampensockel und -fassungen sowie Lehren zur Kontrolle der Austauschbarkeit und Sicherheit - Teil 3: Lehren (IEC 60061-3:1969 + Ergänzungen A:1970 bis U:1997 + A20:1998 bis A35:2005, modifiziert)
Více informacíE ÖNORM EN ISO 8230-3 1.3.2006
Neplatná norma E ÖNORM EN ISO 8230-3 Safety requirements for dry-cleaning machines - Part 3: Machines using flammable solvents (ISO/DIS 8230-3:2005)
Více informacíÖNORM EN ISO 6360-3 1.3.2006
Platná norma ÖNORM EN ISO 6360-3 Zahnheilkunde - Nummernsystem für rotierende Instrumente - Teil 3: Besondere Eigenschaften von Bohrern und Fräsern (ISO 6360-3:2005)
Více informacíÖNORM EN ISO 3834-3 1.3.2006
Platná norma ÖNORM EN ISO 3834-3 Qualitätsanforderungen für das Schmelzschweißen von metallischen Werkstoffen - Teil 3: Standard-Qualitätsanforderungen (ISO 3834-3:2005)
Více informacíÖVE/ÖNORM EN 60519-3 1.3.2006
Platná norma ÖVE/ÖNORM EN 60519-3 Sicherheit in Elektrowärmeanlagen - Teil 3: Besondere Anforderungen an induktive und konduktive Erwärmungsanlagen und an Induktionsschmelzanlagen (IEC 60519-3:2005)
Více informacíÖNORM EN ISO 4545-3 1.3.2006
Neplatná norma ÖNORM EN ISO 4545-3 Metallische Werkstoffe - Härteprüfung nach Knoop - Teil 3: Kalibrierung der Härtevergleichsplatten (ISO 4545-3:2005)
Více informacíÖVE/ÖNORM EN 60432-3 1.3.2009
Neplatná norma ÖVE/ÖNORM EN 60432-3 Glühlampen - Sicherheitsanforderungen - Teil 3: Halogen-Glühlampen (Fahrzeuglampen ausgenommen) (IEC 60432-3:2002 + A1:2005 + A2:2008) (deutsche Fassung)
Více informacíE ÖNORM EN ISO 1167-3 1.3.2006
Neplatná norma E ÖNORM EN ISO 1167-3 Rohre, Formstücke und Bauteilkombinationen aus thermoplastischen Kunststoffen für den Transport von Flüssigkeiten - Bestimmung der Widerstandsfähigkeit gegen inneren Überdruck - Teil 3: Vorbereitung der Rohrleitungsteile (ISO/DIS 1167-3:2005)
Více informacíÖVE/ÖNORM EN 61300-3-37 1.3.2006
Platná norma ÖVE/ÖNORM EN 61300-3-37 Lichtwellenleiter - Verbindungselemente und passive Bauteile - Grundlegende Prüf- und Messverfahren - Teil 3-37: Untersuchungen und Messungen - Endflächenwinkel schräg polierter optischer Fasern (IEC 61300-3-37:2005)
Více informacíE ÖVE/ÖNORM EN 61326-2-5 1.8.2005
Neplatná norma E ÖVE/ÖNORM EN 61326-2-5 Electrical equipment for measurement, control and laboratory use - EMC requirements - Part 2-5: Particular requirements - Test configurations, operational conditions and performance criteria for field devices with interfaces according to communication profile Family 3 Profile 3/2 (IEC 65A/439/CDV)
Více informacíE ÖVE/ÖNORM EN 60603-2/A1 1.2.2005
Neplatná norma E ÖVE/ÖNORM EN 60603-2/A1 Steckverbinder für gedruckte Schaltungen für Frequenzen unter 3 MHz - Teil 2: Bauartspezifikation für gütebestätigte indirekte Steckverbinder für gedruckte Schaltungen, Rastermaß 2,54 mm (0,1 in), mit gemeinsamen Einbaumerkmalen (IEC 60603-2:1995/A1:2000, nicht beigelegt) (Änderung)
Více informacíE ÖVE/ÖNORM EN 50065-2-2/A1 1.2.2005
Neplatná norma E ÖVE/ÖNORM EN 50065-2-2/A1 Signalling on low-voltage electrical installations in the frequency range 3 kHz to 148,5 kHz - Part 2-2: Immunity requirements for mains communications equipment and systems operating in the range of frequencies 95 kHz to 148,5 kHz and intended for use in industrial environments (Amendment)
Více informacíE ÖNORM EN ISO 19110 1.3.2006
Neplatná norma E ÖNORM EN ISO 19110 Geoinformation - Objektartenkataloge (ISO 19110:2005, nicht inkludiert)
Více informacíPodobné fráze: e onorm en 203 2 2 1 2 2005 | e onorm en 81 40 1 2 2005 | e onorm en 492 a2 1 6 2005 | e onorm en 2327 1 9 2005 | e onorm en 2084 1 8 2005 | onorm en 413 2 1 8 2005 | e onorm en 4615 1 9 2005 | e onorm en 2087 1 9 2005 | e onorm en 4616 1 9 2005 | e onorm en 40 4 1 6 2005 | onorm en 438 2 1 5 2005 | e onorm en 2702 1 8 2005 | onorm en 843 4 1 8 2005 | e onorm en 4496 1 9 2005 | onorm en 926 2 1 7 2005 | e onorm en 516 1 8 2005 | e onorm en 4460 1 9 2005 | e onorm en 4591 1 9 2005 | onorm en 438 4 1 5 2005 | onorm en 4054 1 8 2005 | e onorm en 494 a1 1 4 2005 | onorm en 81 70 1 5 2005 | e onorm en 2243 2 1 9 2005 | bs en 12904 2005 31 3 2005 | bs en 1212 2005 31 3 2005 | e din en 14468 1 2013 07 1 7 2013 | bs en 14571 2005 3 5 2005 | din en 890 2005 03 1 3 2005 | din en 357 2005 02 1 2 2005 | e onorm en 1993 1 11 1 11 2005 | e onorm en 12259 1 a3 1 10 2005 | onorm en iso 12213 1 1 10 2005 | e onorm en 15316 2 1 1 12 2005 | onorm en iso 12402 1 1 12 2005 | e onorm en 12607 1 1 10 2005