Xb 1 10 2011
Pro vyhledávací frázi Xb 1 10 2011 jsme na našem vyhledávači našli 6757 výsledků. Nenašli jste přesně to, co jste hledali? Zkuste frázi Xb 1 10 2011 trochu pozměnit a opět zadat do vyhledávacího pole. Pevně věříme, že produkt, který hledáte v naší nabídce na srovnávači CoChceš.cz naleznete!
ASTM D5096-02(2011) 1.10.2011
Historická norma ASTM D5096-02(2011) Standard Test Method for Determining the Performance of a Cup Anemometer or Propeller Anemometer
Více informací
ASTM D5366-96(2011) 1.10.2011
Historická norma ASTM D5366-96(2011) Standard Test Method for Determining the Dynamic Performance of a Wind Vane
Více informací
ASTM D5527-00(2011) 1.10.2011
Historická norma ASTM D5527-00(2011) Standard Practices for Measuring Surface Wind and Temperature by Acoustic Means
Více informací
ASTM D5741-96(2011) 1.10.2011
Historická norma ASTM D5741-96(2011) Standard Practice for Characterizing Surface Wind Using a Wind Vane and Rotating Anemometer
Více informací
ASTM E2461-05(2011) 1.10.2011
Historická norma ASTM E2461-05(2011) Standard Practice for Determining the Thickness of Glass in Airport Traffic Control Tower Cabs
Více informací
ASTM E422-05(2011) 1.10.2011
Historická norma ASTM E422-05(2011) Standard Test Method for Measuring Heat Flux Using a Water-Cooled Calorimeter
Více informací
ASTM E459-05(2011) 1.10.2011
Historická norma ASTM E459-05(2011) Standard Test Method for Measuring Heat Transfer Rate Using a Thin-Skin Calorimeter
Více informací
ASTM E784-89(2011) 1.10.2011
Historická norma ASTM E784-89(2011) Standard Specification for Clamps, Utility, Laboratory, and Holders, Buret and Clamp
Více informací
ASTM F1147-05(2011) 1.10.2011
Historická norma ASTM F1147-05(2011) Standard Test Method for Tension Testing of Calcium Phosphate and Metallic Coatings
Více informací
ASTM D6364-06(2011) 1.10.2011
Historická norma ASTM D6364-06(2011) Standard Test Method for Determining Short-Term Compression Behavior of Geosynthetics
Více informací
ASTM D6552-06(2011) 1.10.2011
Historická norma ASTM D6552-06(2011) Standard Practice for Controlling and Characterizing Errors in Weighing Collected Aerosols
Více informací
ASTM C429-01(2011) 1.10.2011
Historická norma ASTM C429-01(2011) Standard Test Method for Sieve Analysis of Raw Materials for Glass Manufacture
Více informací
ASTM D245-06(2011) 1.10.2011
Platná norma ASTM D245-06(2011) Standard Practice for Establishing Structural Grades and Related Allowable Properties for Visually Graded Lumber
Více informací
ASTM D7001-06(2011) 1.10.2011
Platná norma ASTM D7001-06(2011) Standard Specification for Geocomposites for Pavement Edge Drains and Other High-Flow Applications
Více informací
ASTM F1425-06(2011) 1.10.2011
Platná norma ASTM F1425-06(2011) Standard Test Method for Determining the Tribocharge of Two-Component Developer Materials
Více informací
ASTM F2035-00(2011) 1.10.2011
Platná norma ASTM F2035-00(2011) Standard Practice for Measuring the Dark Stability of Ink Jet Prints
Více informací
ASTM F2036-05(2011) 1.10.2011
Platná norma ASTM F2036-05(2011) Standard Test Method for Evaluation of Larger Area Density and Background on Electrophotographic Printers
Více informací
ASTM F2494-05(2011) 1.10.2011
Platná norma ASTM F2494-05(2011) Standard Test Method for Determining Energy Consumption of Copiers and Similar Office Imaging Equipment
Více informací
ASTM F505-87(2011) 1.10.2011
Platná norma ASTM F505-87(2011) Standard Practice for Comparative Evaluation of Imaging Properties of Liquid Electrostatic Toners
Více informací
ASTM F706-96(2011) 1.10.2011
Platná norma ASTM F706-96(2011) Standard Practice for Determination of Fusion Temperature of Dry Electrostatic Heat-Fixing Toners
Více informací
ASTM D4049-06(2011) 1.10.2011
Historická norma ASTM D4049-06(2011) Standard Test Method for Determining the Resistance of Lubricating Grease to Water Spray
Více informací
ASTM D4185-06(2011) 1.10.2011
Historická norma ASTM D4185-06(2011) Standard Practice for Measurement of Metals in Workplace Atmospheres by Flame Atomic Absorption Spectrophotometry
Více informací
STO GUGGI08.30-2011 10.1.2011
Platná norma STO GUGGI08.30-2011 Methodical instructions on calculations of drain from undrained bogs and innings
Více informací
ASTM F2213-06(2011) 1.10.2011
Historická norma ASTM F2213-06(2011) Standard Test Method for Measurement of Magnetically Induced Torque on Medical Devices in the Magnetic Resonance Environment
Více informací
ASTM F2261-06(2011) 1.10.2011
Historická norma ASTM F2261-06(2011) Standard Test Method for Pressure Rating Poly(Vinyl Chloride) (PVC) Plastic Pipe Fittings, Schedule 40 and 80 Socket-Type
Více informací
ASTM F2366-05(2011) 1.10.2011
Historická norma ASTM F2366-05(2011) Standard Practice for Determining the Relative Lightfastness of Ink Jet Prints Exposed to Window Filtered Daylight Using a Xenon Arc Light Apparatus
Více informací
ASTM E191-64(2011) 1.10.2011
Historická norma ASTM E191-64(2011) Standard Specification for Apparatus For Microdetermination of Carbon and Hydrogen in Organic and Organo-Metallic Compounds
Více informací
ASTM F1478-06(2011) 1.10.2011
Historická norma ASTM F1478-06(2011) Standard Test Method for Determination of Abrasion Resistance of Images Produced from Copiers and Printers (Taber Method)
Více informací
ASTM B735-06(2011) 1.10.2011
Historická norma ASTM B735-06(2011) Standard Test Method for Porosity in Gold Coatings on Metal Substrates by Nitric Acid Vapor
Více informací
ASTM B755-00(2011) 1.10.2011
Historická norma ASTM B755-00(2011) Standard Specification for Nickel-Chromium-Molybdenum-Tungsten Alloys (UNS N06110) Plate, Sheet, and Strip
Více informací
ASTM B761-06(2011) 1.10.2011
Historická norma ASTM B761-06(2011) Standard Test Method for Particle Size Distribution of Metal Powders and Related Compounds by X-Ray Monitoring of Gravity Sedimentation
Více informací
ASTM B810-01a(2011) 1.10.2011
Historická norma ASTM B810-01a(2011) Standard Test Method for Calibration of Atmospheric Corrosion Test Chambers by Change in Mass of Copper Coupons
Více informací
ASTM B920-01(2011) 1.10.2011
Historická norma ASTM B920-01(2011) Standard Practice for Porosity in Gold and Palladium Alloy Coatings on Metal Substrates by Vapors of Sodium Hypochlorite Solution
Více informací
ASTM D3266-91(2011) 1.10.2011
Historická norma ASTM D3266-91(2011) Standard Test Method for Automated Separation and Collection of Particulate and Acidic Gaseous Fluoride in the Atmosphere (Double Paper Tape Sampler Method)
Více informací
ASTM D6916-06c(2011) 1.10.2011
Historická norma ASTM D6916-06c(2011) Standard Test Method for Determining the Shear Strength Between Segmental Concrete Units (Modular Concrete Blocks)
Více informací
ASTM D2786-91(2011) 1.10.2011
Historická norma ASTM D2786-91(2011) Standard Test Method for Hydrocarbon Types Analysis of Gas-Oil Saturates Fractions by High Ionizing Voltage Mass Spectrometry
Více informací
ASTM D3239-91(2011) 1.10.2011
Historická norma ASTM D3239-91(2011) Standard Test Method for Aromatic Types Analysis of Gas-Oil Aromatic Fractions by High Ionizing Voltage Mass Spectrometry
Více informací
ASTM D5845-01(2011) 1.10.2011
Historická norma ASTM D5845-01(2011) Standard Test Method for Determination of MTBE, ETBE, TAME, DIPE, Methanol, Ethanol and tert-Butanol in Gasoline by Infrared Spectroscopy
Více informací
ASTM D6058-96(2011) 1.10.2011
Historická norma ASTM D6058-96(2011) Standard Practice for Determining Concentration of Airborne Single-Crystal Ceramic Whiskers in the Workplace Environment
Více informací
ASTM E2431-06(2011) 1.10.2011
Historická norma ASTM E2431-06(2011) Standard Practice for Determining the Resistance of Single Glazed Annealed Architectural Flat Glass to Thermal Loadings
Více informací
ASTM D6056-96(2011) 1.10.2011
Platná norma ASTM D6056-96(2011) Standard Test Method for Determining Concentration of Airborne Single-Crystal Ceramic Whiskers in the Workplace Environment by Transmission Electron Microscopy
Více informací
ASTM D6057-96(2011) 1.10.2011
Platná norma ASTM D6057-96(2011) Standard Test Method for Determining Concentration of Airborne Single-Crystal Ceramic Whiskers in the Workplace Environment by Phase Contrast Microscopy
Více informací
ASTM D6059-96(2011) 1.10.2011
Platná norma ASTM D6059-96(2011) Standard Test Method for Determining Concentration of Airborne Single-Crystal Ceramic Whiskers in the Workplace Environment by Scanning Electron Microscopy
Více informací
ASTM E128-99(2011) 1.10.2011
Platná norma ASTM E128-99(2011) Standard Test Method for Maximum Pore Diameter and Permeability of Rigid Porous Filters for Laboratory Use
Více informací
ASTM F1175-88(2011) 1.10.2011
Platná norma ASTM F1175-88(2011) Standard Practice for Using the Computer Impact Print-Out Unit as a Test Instrument for Manifold Comparison
Více informací
ASTM F1319-94(2011) 1.10.2011
Platná norma ASTM F1319-94(2011) Standard Test Method for Determination of Abrasion and Smudge Resistance of Images Produced from Business Copy Products (Crockmeter Method)
Více informací
ASTM F1320-01(2011) 1.10.2011
Platná norma ASTM F1320-01(2011) Standard Test Method for Evaluating Thermal Paper Employing a Facsimile Thermal Printer as a Test Instrument
Více informací
ASTM F1424-92(2011) 1.10.2011
Platná norma ASTM F1424-92(2011) Standard Test Method for Estimating Toner Usage in Full-Color Copiers Utilizing Dry Mono- or Dual-Component Toners
Více informací
ASTM F1945-05(2011) 1.10.2011
Platná norma ASTM F1945-05(2011) Standard Practice for Determining the Lightfastness of Ink Jet Prints Exposed to Indoor Fluorescent Lighting
Více informací
ASTM F2037-00(2011) 1.10.2011
Platná norma ASTM F2037-00(2011) Standard Practice for Predicting the Lifetime of Ink Jet Prints Stored in Dark Keeping Conditions in Typical Office Environments
Více informací
ASTM F2495-05(2011) 1.10.2011
Platná norma ASTM F2495-05(2011) Standard Test Method for Determining Energy Consumption of MFDs with Copying Capability and Similar Office Imaging Equipment
Více informací
ASTM F2498-05(2011) 1.10.2011
Platná norma ASTM F2498-05(2011) Standard Practice for Determining the Drying Time of Inkjet Media and Inks Using a Smudge Method
Více informací
ASTM F2555-06(2011) 1.10.2011
Platná norma ASTM F2555-06(2011) Standard Practice for Determining Page Yield of Ink Jet Printer Cartridges—Continuous Printing Method
Více informací
ASTM F605-88(2011) 1.10.2011
Platná norma ASTM F605-88(2011) Standard Practice for Determining Compatibility of One-Time Carbon Paper with Carbonless Copy Papers When Interleaved into the Same Manifold Set
Více informací
ASTM F685-96(2011) 1.10.2011
Platná norma ASTM F685-96(2011) Standard Practice for Determining Toner Usage, Efficiency, and Dusting Nonheat Fixing Copiers Using Single-Component Toner Systems
Více informací
ASTM F686-94(2011) 1.10.2011
Platná norma ASTM F686-94(2011) Standard Practice for Evaluation of Image Quality Produced by Carbonless Copy Paper with an Electric or Electronic Typewriter
Více informací
ASTM D3608-95(2011) 1.10.2011
Historická norma ASTM D3608-95(2011) Standard Test Method for Nitrogen Oxides (Combined) Content in the Atmosphere by the Griess-Saltzman Reaction
Více informací
ASTM D6561-06(2011) 1.10.2011
Historická norma ASTM D6561-06(2011) Standard Test Method for Determination of Aerosol Monomeric and Oligomeric Hexamethylene Diisocyanate (HDl) in Air with (Methoxy-2-phenyl-1) Piperazine (MOPIP) in the Workplace
Více informací
ISO 10667-1:2011 11.10.2011
Platná norma ISO 10667-1:2011 Assessment service delivery -- Procedures and methods to assess people in work and organizational settings -- Part 1: Requirements for the client(Livraison d´un service d´évaluation -- Modes opératoires et méthodes d´évaluation des personnes au travail et des parametres organisationnels -- Partie 1: Exigences pour le client)
Více informací
ISO 13209-1:2011 27.10.2011
Platná norma ISO 13209-1:2011 Road vehicles -- Open Test sequence eXchange format (OTX) -- Part 1: General information and use cases(Véhicules routiers -- Format public d´échange de séquence-tests (OTX) -- Partie 1: Information générale et cas d´utilisation)
Více informací
Podobné fráze: bs en 15925 2011 31 10 2011 | e din en iso 10380 2011 03 1 3 2011 | din en 62329 3 101 2011 05 1 5 2011 | e din en iso 10133 2011 05 1 5 2011 | e din en iso 10595 2011 07 1 7 2011 | e din en iso 10685 3 2011 08 1 8 2011 | bs en iso 15530 3 2011 31 10 2011 | e din en iso 10523 2011 08 1 8 2011 | e din en iso 10943 2011 06 1 6 2011 | din en iso 10893 2 2011 07 1 7 2011 | din en iso 10893 5 2011 07 1 7 2011 | din cen iso tr 10400 2011 07 1 7 2011 | e din en iso 9455 10 2011 04 1 4 2011 | bs en iso 10893 1 2011 30 4 2011 | e din en 1024 2011 08 1 8 2011 | e din en 61340 4 10 2011 07 1 7 2011 | e din en 10149 2 2011 04 1 4 2011 | e din en 10025 4 2011 04 1 4 2011 | bs en iso 10218 1 2011 30 9 2011 | bs en iso 10893 12 2011 30 4 2011 | bs en iso 11073 10408 2011 30 4 2011 | din en iso 10414 2 2011 09 1 9 2011 | din en iso 10890 2011 02 1 2 2011 | din en iso 10893 3 2011 07 1 7 2011 | din en iso 10773 2011 08 1 8 2011 | bs en iso 10893 11 2011 30 4 2011 | bs en iso 11073 10417 2011 30 4 2011 | e din en 10223 3 2011 07 1 7 2011 | bs en iso 14602 2011 31 10 2011 | e din en iso 10723 2011 05 1 5 2011 | din en iso 10769 2011 09 1 9 2011 | din en 4641 104 2011 06 1 6 2011 | din en iso 10893 6 2011 07 1 7 2011 | 1000 rieseni 3 2011 | 1000 rieseni 4 2011